PRODUCTS

Plastic vacuum feeder

- you can use it with ALL TYPES of 6-frame hives

- you can use it with both 

         - polystyrene lid

         - Zeus transport cover for beehive

- HARD-WEARING -  it is unassailable by ants and other insects , unlike those made of polystyrene

- It can also be used for CANDY by removing one of the two plugs. 

- It comes with a divider that allows the beekeeper to choose whether or not to let the bees access the trough to clean the feeder basin.

- It can accommodate the Zeus rectangular vacuum feeder.

- Dimensions : 49 x 27,5 x 7,5 cm

- Capacity of 3,5 Litre

FOR PURCHASES :  CLICK HERE

Plastic vacuum feeder

- you can use it with ALL TYPES of 6-frame hives

- you can use it with both 

         - polystyrene lid

         - Zeus transport cover for beehive

- HARD-WEARING -  it is unassailable by ants and other insects , unlike those made of polystyrene

- if you want to give CANDY to the bees , you can pull out the central stopper and put it in the cone so the bees can not exit.

ADDITIONAL ACCESSORIES:

- CUP 

       - using the cup, the bees can not excape

       - if you put the cup on the little wings at the bottom of the cone, the cup will remains raised and the bees can pass under it ( it's useful to clean the feeder when it's at the minimun syrup level )

- RIBBED CUP :   used when the hive contains two colonies separated by a central divider.

- Dimensions : 49 x 27,5 x 7,5 cm

- Capacity of 3,5 Litre

FOR PURCHASES :  CLICK HERE

Capacity: 3 litres (over 4 kg. of syrup)

Anti-slip walls

Material: plastic polypropylene

The side support wings are indestructible

Shock-resistant

Optimal to use for treatments with various types of acids (there are no screws that can be corroded).

Can be supplied with a TOP CAP which has a double function:

- DOES NOT allow bees to enter and build wax bridges.

- The feeder can be used as a division board.

Dimensions: 30 x 47.5 x 2.5 cm.

FOR PURCHASES  :  CLICK HERE

 DOUBLE FRAME FEEDER IN POLYPROPYLENE “TASC-ONE”

Capacity: 7 litres (approximately 10 kg. of syrup)

Anti-slip walls

Material: plastic polypropylene

The side support wings are indestructible

Shock-resistant

Optimal to use for treatment with various types of acids (there are no screws that can be corroded).

Can be supplied a TOP CAP with: 2 holes for filling the syrup, N.2 entrances to decrease bee drowning, DOES NOT allow bees to enter and build wax bridges

Dimensions: 30 x 47.5 x 7 cm.

FOR PURCHASES :  CLICK HERE

TWO VERSIONS:

- 2,5 LITRES

- 5 LITRES

With this vacuum feeder we can achieve:

either a STIMULATION NUTRITION (with 3 or 4 holes diam. 1.5/2 mm.)

or a STOCK NUTRITION (with 1 or 2 holes diam. 3 mm) without unleashing any looting.

It allows you to feed at any time of the day and with any weather condition.

Material: plastic polypropylene

Cylindrical shape with diameter of 28x6 cm.

The set includes:

- N. 3 caps without holes

- N. 1 yellow anti-drip cap for transport

- N.2 yellow pins to open the vacuum feeder for an optimal cleaning

The vacuum feeder is STACKABLE for an easier and better transportation.

FOR PURCHASES :

VACUUM FEEDER  2,5 LITRES   CLICK HERE

VACUUM FEEDER  5 LITRES    CLICK HERE

TWO VERSIONS FOR CROWN BOARD:

- WITH CENTRAL HOLE

- WITHOUT CENTRAL HOLE

With the vacuum feeder we can achieve:

either a STIMULATION NUTRITION (with 3 or 4 holes diam. 1.5/2 mm.) or a

STOCK NUTRITION (with 1 or 2 holes diam. 3 mm) without unleashing any looting.

It allows you to feed at any time of the day and with any weather condition.

Material: plastic polypropylene

Dimensions: 21 x 38 x 3,7 cm .

The set includes: N. 3 caps without holes + N. 1 yellow anti-drip cap for transport

FOR PURCHASES :  CLICK HERE

It has wings that allow the hives to be stacked during the transportation.

Material: plastic

Dimensions: 49.5 X 27.3 cm

TWO VARIANTS:

- "FRAME TYPE"

- "SHALLOW BOX TYPE"

The walls can be open to facilitate the insertion of the frame

Material: plastic polypropylene

N. 2 Removable caps for the insertion of the queen bee

FOR PURCHASES : CLICK HERE

The Zeus division board insulates is a product that a polystyrene block on the inside and has a plastic cover on the outside.

Our product has the following features:

- The polystyrene block guarantee a thermal conductivity equal to 0,033 W/(mk). 

- The outer plastic coating protects the polystyrene block inside.

- Due to the composition of the division board, the durability is much longer than all products currently on the market.

- Cleaning is easy and fast thanks to the external smooth surface.

FOR PURCHASES : CLICK HERE

It has horizontal and vertical movements which allows to separate all type of hives in two parts. 

Material :plastic polypropylene

N. 2 Removable caps

Dimensions:

length min. 44.6 cm / max. 45.2 cm

height min. 32.3 cm / max. 34.5 cm

FOR PURCHASES : CLICK HERE

- material: plastic (polypropylene)

- shape: rectangular

- dimensions: 50 x 42.5 cm

- material: plastic (polypropylene)

- shape: rectangular

- dimensions: 49.8 x 27 cm

Plastic pocket feeder

- non-slip walls

- with anti-drowning net

- sealed

- nest type h 12.5 x 47.5 cm

1 liter square feeder

- material: plastic

- shape: square

- The set includes the little cup and the top lid

- dimensions: 19 x 19 x5 cm

- material: plastic

- shape: square

- The set includes the little cup and the top lid

- dimensions: 26 x 26 x 5 cm

8 ways bee escape

- material: plastic

- shape: heptagon

- dimensions: diameter 25 cm